AP-7100
Acrylic Wall Finish Coat
Protect a Wide Variety of Substrates with a Durable, Waterproof Layer of Protection!
Description
AP-7100 Acrylic Wall Finish Coat is a 100% acrylic elastomeric finish coating designed for protecting a wide variety of substrates, including stucco, concrete, brick, EIFS, metal and primed wood. AP-7100 Acrylic Wall Finish Coat bridges hairline cracks, protecting the substrate from wind-driven rain, allowing expansion and contraction with the varying temperatures. It also allows moisture vapor from within the substrate to escape without causing blistering or peeling of the coating. Once cured, AP-7100 provides a waterproof, durable, seamless, flexible, weather resistant layer of protection.
bridges hairline cracks, protecting the substrate from wind-driven rain, allowing expansion and contraction with the varying temperatures.
Available Colors
Quick Application Guide
Min Mil Thickness
18 DFT
Apply by Roller, Brush or Airless Spray Equip.
Average Coverage Rate
1–1¼ GAL
Per Square (Per Coat)
Two Coats Recommended
Recommended Tip Size
.031
At a Required PSI of
3000
Coverage & Drying Time
Apply AP-7100 at a minimum rate of 1 to 1.25 gallons per 100 square feet per coat, according to the substrate and condition. Two coats are recommended. A minimum of 18 mils DFT is recommended to achieve optimal performance of the coating. Normal drying time is 2-6 hours. Armour Proof Coatings recommends applying AP-7100 by airless spray in multiple coats in a crosshatch pattern. This will avoid pinholes and ensure a uniform film build. Backrolling may be necessary. Refer to the Armour Proof Coatings Specification for detailed instructions.
Application
Apply by brush, medium nap roller or airless sprayer.
Airless spray: Minimum pump pressure 3000 psi
Tip Size: .027”-.039” (.031” recommended)
Hose: Use 3/8” up to 100’, from 100’ to 200’ use ½” or larger
Preparation of Substrate
Surface must be pressure washed clean, free of all loose particles, dirt debris and other contaminants that could inhibit adhesion. An Armour Proof primer may be required for the particular substrate. Refer to the Armour Proof Coatings Specification for detailed instructions on how to prepare the specific substrate.
Limitations and Precautions
AP-7100 is a water-based, elastomeric, acrylic coating and is not freeze-thaw stable. Do not apply AP-7100 when ambient air and substrate temperatures fall below 50°F, or if inclement weather is forecasted. Do not apply over wet substrates or in inclement weather. Do not apply if ambient temperature will drop below 32°F in a 24-hour period or dew will settle before coating is allowed to dry. Do not store sealed containers in prolonged sunlight. PROTECT FROM FREEZING DURING SHIPMENT AND STORAGE. Do not store material at temperatures below 45°F. It will freeze and may become unusable at temperatures below 32°F.
Use as Part of a System with these products:
AP-2300
Acrylic Mastic
AP-3100
Acrylic Base Coat
Product Information
Sizes Available
Tools Needed
DATA SHEETS
Available From These Distributors
Click a logo to find a location close to you.
Grow Your Roofing Business
Become an approved applicator of our Armour Proof Coatings systems and gain the perks of being a trusted and approved contractor. Benefits include project referrals, marketing assistance, product trainings & more!
Have Additional Questions About AP-7100 Acrylic Wall Finish Coat?
Looking for information on Warranted Roof Coating Systems?
Have a product specialist reach out to answer any questions you have.
Please fill out the below form completely and we’ll be happy to get in touch with you!